Sinotruk HOWO 6X4 Best Sale 20cbm Refuse Compactor Garbage Truck

• Customization: Available
• After-sales Service: Three Guarantees Policy of Sinotruk
• Warranty: Three Guarantees Policy of Sinotruk
• Model NO.: ZZ1257N4341W
• Type: Compactor
• Certification: ISO9000, CCC, CE
• Volume: ＞15000L
• Emission Standard: Euro 2
• Transmission Type: Manual
• Payload: 10t
• Fuel: Diesel
• Drive Wheel: 6×4
• Brand: Sinotruk
• Models: Large
• Usage: Compression Type
• Condition: New
• Body Volume: 12m3
• Transport Package: Nude
• Trademark: SINOTRUK
• Origin: Qingdao, China
• HS Code: 8705909990
• Production Capacity: 10000 Units/Year
• Package Size: 8900.00cm * 2550.00cm * 3400.00cm
• Package Gross Weight: 12500.000kg

Product Description

Product Description

Howo Garbage Compactor Truck 6x4

1.High compression ratio and large loading capacity:  the loading capacity is equal to twice and a half of the uncompressed waste discharged in the same tonnage.

2.Operation Automation: With the computer control system, the driver is required to operate all the loading and unloading operations.
3.Two operation modes, automatic and semi-automatic, can be set up, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.

4.Good economy: When the special equipment works, the computer control system automatically controls the throttle.

Double insurance system: The operation system has dual functions of computer control and manual control, which greatly ensures and improves the utilization rate of vehicles.

5.Flipping mechanism: Flipping mechanism with garbage can (or bucket) can be optionally assembled.

Detailed Photos

 

Product Parameters

Model	Chassis model: ZZ1257N4341W
Engine	WD615.69(336Hp at 2200r/min, Euro II)1350Nm at 1100-1600r/min
Clutch	Single-plate dry diaphragm spring clutch, diameter 430 mm, hydraulically operating with air assistance
Transmission	HW19710, 10 forward and 2 reverse, manual, With HW70 PTO
Propeller Shaft	Double universal joint propeller shaft with gear-shaped coupling flange
Front Axle	HF9 (9000Kg)
Rear Axles	HC16 (2x16000Kg) Ratio: 4.8
Chassis	Enhanced version of multiple-leaf spring (Front 10 pieces, Rear 12 pieces)
Fuel tank	With one 400L fuel tank with locking fuel cap
Steering	model ZF8118 , hydraulic steering with power assistance Ratio: 22.2-26.2
Brakes	Service brake: dual circuit compressed air brake Parking Brake(emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust brake
Wheel & Tires	Rims width: 8.5 Tires : 12.00R20
Cab	HW76 cab, one sleeper, all steel forward control, 55°hydraulically tiltable to the front, 2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating & ventilation system, exterior sun visor, stereo radio, safety belts, air horn, air conditioner, and single berths with 4-point support fully floating suspension and shock absorber with transverse stabilizer, safety belt, air conditioner, adjustable roof flap.
Electrics	Operating voltage:24V, negative grounded;  Starter: 24V, 5.4KW Alternator: 3-phrase, 28V, 2240W;  Batteries: 2×12, 165Ah Cigar-lighter, horn, headlamp, fog light, brake lights, indicators and reverse lamp
Cargo Body	22m³,with filling gun, and flow meter, pressure discharge fuel, automatic fuel outlet, without flow meter; Exhaust pipe proposed, equipped with spark arrestor.
Dimensions in mm	Wheel base Front wheel track Rear wheel track Front overhang Rear overhang Approach angle(^o) Departure angle(^o) Overall Dimension	4300+1400 2022 1830 1500 2600 16 15 9795x2500x3250 (mm)
Weight in kg	Net weight Gross Vehicle Weight Front axle loading capacity Rear axle loading capacity	15750 41000 9000 16000×2
Performance	Maximum driving speed(km/h) Maximum grade ablility (%) Minimum ground clearance(mm) Minimum turning circle(m)	85 35 290 15
Optional	ABS Air conditioner Tires Bumper Truck color Intercooler Protector Fire Extinguisher

 

Packaging & Shipping

Production Line

Company Profile

 

Our Advantages

1) We are manufacturer and have more than 10 years professional exporting experience.
2) 1 set truck or small truck parts order can be accepted.
3) Many colors and accessories can be customized.
4) The truck performance is adjustable according to your demand.

More Products:


Training and Service:

Customers and friends from overseas:

FAQ

1: Payment: 
A:30% advance payment after signed the contract, 70% balance should be paid before delivery. We can accept T/T and L/C
2. Delivery time: 
A:25-45 working days after payment is received. According to different trucks models
3. How about your product quality? 
A: The products have passed the ISO, CCC, SGS, BV, and CONTECNA qualification certification. All our spare parts are from the original manufacturers with original part number and and anti-fake label, the quality is 100% guaranteed. 
4: How long is the warranty period?
A:The warranty of our products is 1 year or 50000km, which comes first